I just assembled my treadmill and the display doesn't turn on.Updated 3 years ago
Turn off the power and unplug the power cord for 5 minutes. Take off the motor cover. Unplug and re-plug, one at a time, the two motor connections from the lower board. Unplug the main 7-conductor harness from the lower board and re-plug. Check that all wiring is connected to the inside connectors of the power input socket, the power switch, and the circuit breaker switch. Plug-in the power cord. Turn the power back on. If it still doesn’t power up, replace the motor control board. You can do this by contacting our Tech support team at [email protected]